Drainage Plate

The drainage plate is a high-density polyethylene (HDPE) based insulation protection and drainage material.
It creates an air gap between the soil and the building element, allowing the building to breathe, the water to have flowed safely thanks to its blistered structure, high mechanical properties, and durability against loads and crushing during filling and after filling. Economical, easy to implement.

It is a reliable solution for water problems in all building projects. Drain plates are used for insulation protection in waterproofing applications. Protect the base wall from moisture. It provides insulation that is resistant to water and environmental factors. It provides reliable drainage for underground and cracked water in underground and heavy construction.

DRAINAGE PLATE
PROPERTIES
TEST METHOD UNIT VALUES
RAW MATERİAL HIGH-DENSITY POLYETHYLENE ( HDPE)
IDENTIFICATION CODE - DP 400 DP 500 DP 600 DP 700 DP 800 DP 900 DP 1000
THICKNESS TSE K 84 mm 0,30-
0,40
0,40-
0,50
0,50-
0,60
0,60-
0,70
0,70-
0,80
0,80-
0,90
0,90-
1,00
DENSITY TSE K 84 gr/cm3 0,935-0,965
WATER ABSORPTION RATE TSE K 84 % <0,3
HOT AND LOW TEMPERA- TURE TESTİNG(10 MİNS WAITING AT +80 0C AND – 30 0C ) TSE K 84 TEARING AND CRACKING ARE NOT OBSERVED
PRESSURE RESISTANCE TSE K 84 kN/m2 120-
200
200-
250
250-
300
300-
350
350-
400
400-
450
450-
500
WEIGHT PER UNIT AREA TSE K 84 gr / m2 400 500 600 700 800 900 1000
NUMBER OF BUBBLES TSE K 84 Number/m2 1800
LENGTH - m 20
WIDTH - m 2